Sealand Universal Level Indicator Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Sealand Universal Level Indicator. SeaLand Universal Level Indicator User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 1
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
1
SPECIFICATIONS
MODEL INFORMATION
Part Number Description
385311253 Universal Level Indicator Kit, 12-inch (305 mm)
385311254 Universal Level Indicator Kit, 24-inch (610 mm)
Maximum Allowable Current:
12 Volts DC: 1.6 amps
24 volts DC: .83 amps
INSTALLATION INSTRUCTIONS
1. Cut PEX Tubing to desired length. DO NOT CUT WIRES INSIDE TUBING.
2. ThreadwiresthroughBarbedAdapterandAssemblyBlock(seeg.1).Makesurewiresgothroughhole
in bottom of Assembly Block.
3. Slide 3" Assembly Adapter over Reed Switch Stem, and place cut end of PEX Tubing on top of Barbed
Adapter.
4. Secure PEX Tubing onto Barbed Adapter by carefully hammering down on 3" Assembly Adapter.
5. Turnassemblyright-sideup(seeg.2).SlideSealingGrommetontoPEXTubingwithlarger,printedside
of grommet facing up. Allow
SealingGrommettoremain
loose around PEX Tubing.
6. Position Float for desired
function. Slide Float onto
Reed Switch Stem and
secure in place with Clip.
7. Drill or use existing 1-1/8-
inch (28.6 mm) dia. hole in
holding tank for insertion
of level indicator assembly.
Lower Float and PEX
Tubing into tank. Push
SealingGrommetintohole
so that no gaps show on
top of tank. Push top part of
assembly (Barbed Adapter)
downintoSealingGrommet
untilitisatagainsttopof
grommet (see below).
8. Connect wires as they were previously connected.
Universal Level Indicator Kit
Installation Instructions
Dometic Corporation - Sanitation Division
13128 State Rt. 226, P.O. Box 38
Big Prairie, OH 44611-0038 USA
330-439-5550
1-800-321-9886•Fax:330-496-3097
Figure 1 Figure 2
® Registered; ™ Trademark of Dometic Corporation
© Dometic Corporation
600345176 02 06/13
TYPiCAL BLACKWATer TANK
FLOAT POSiTiONS
NOTE: Float switches will have either a recessed shoulder
on one end, a white band around one end, or the letters
"NO at one end and "NC" at the opposite end. Position
Float according to directions below.
Przeglądanie stron 0
1

Podsumowanie treści

Strona 1 - Installation Instructions

1SPECIFICATIONSMODEL INFORMATIONPart Number Description385311253 Universal Level Indicator Kit, 12-inch (305 mm) 385311254 Universal Level Indicato

Komentarze do niniejszej Instrukcji

Brak uwag